Clamping Bars

double acting, with build-in piston
clamping force up to 116 kN, piston stroke 8 mm

Downloads

Catalogue sheet

US ES FR PL

Operating instructions

Information Series

Description

Clamping bars 2.2097

double acting , with built-in pistons
clamping force up to 116 kN, piston stroke 8 mm
The clamping bar is directly screwed on the press bed or ram using a spacer bar. Clamping is carried out on the die clamping edge by applying hydraulic pressure to the port of the 2, 3 or 6 pistons which are arranged side by side with a pressure medium.
Unclamping is made by pressurising the port B. Hydraulic oil is supplied through G 1/4 ports provided on both sides.
Flat design with die inlet chamfer.

Accessories (4)

Number

Item no.	CAD data	Description
Item no. 520710024	CAD data	Description Spacer bar for 8.2096.XXX, H=28 mm 220 x 58 x 28 mm (L x B x H) for clamping edge: 25 ± 1.5 mm *as per catalogue sheet WZ 2.2096
Item no. 520710032	CAD data	Description Spacer bar for 8.2096.XXX, H=53 mm 220 x 58 x 28 mm (L x B x H) for clamping edge: 50 ± 1.5 mm *as per catalogue sheet WZ 2.2096
Item no. 520710081	CAD data	Description Spacer bar for 8.2096.XXX, H=75 mm 220 x 58 x 75 mm (L x B x H) for clamping edge: 72 ± 1.5 mm *as per catalogue sheet WZ 2.2096
Item no. 805300040	CAD data	Description Plug-in connector for clamping bars arranged in series