Threaded-body cylinders

single acting with spring return and double wiper
max. operating pressure 500 bar

Downloads

Catalogue sheet

US ES FR

Operating instructions

EN ES FR

Information Series

Description

B1.461 Threaded-Body Cylinder

These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture. Sealing is made with the supplied sealing ring at the bottom of the location hole. The plunger construction impedes penetration of fluids into the spring area. The double wiper protects the piston guide and in combination with the piston rod seal provides a seal with very little leakage.

Accessories (41)

Number

Item no.	CAD data	Description
Item no. 3614032	CAD data	Description Contact bolt M6 x 10 mm cone head as per data sheet G3.800
Item no. 3614033	CAD data	Description Contact bolt M5 x 9 mm cone head as per data sheet G3.800
Item no. 3614038	CAD data	Description Contact bolt M8 x 8 mm dome head as per data sheet G3.800
Item no. 3614039	CAD data	Description Contact bolt M6 x 6 mm dome head as per data sheet G3.800
Item no. 3614065	CAD data	Description Contact bolt M27 x 32 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614066	CAD data	Description Contact bolt M30 x 25 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614068	CAD data	Description Contact bolt M6 x 6 mm cone head as per data sheet G3.800
Item no. 3614069	CAD data	Description Contact bolt M8 x 8 mm cone head as per data sheet G3.800
Item no. 3614070	CAD data	Description Contact bolt M10 x 12 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614072	CAD data	Description Swivel contact bolt M8 x 8 mm ball - flat face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800